• Research & Development
• Investments & Funding
• Partnerships

• Technology Verification
• Technology Profiles
• Achievements / Barriers

OCETA has assisted numerous Canadian Technology Vendors with the development and distribution of Environmental Technology Profiles to showcase their innovative remediation technologies on the OCETA and AR web sites and at events, tradeshows and workshops.

A - E

Ammonium Nitrate Removal with Floating Cattail Mats
Mikro-Tek
Denitrification of wastewater using an accelerated growth process for cattail mats, which are deployed and develop into a floating cattail island within one growing season, thereby facilitating increased levels of denitrification over shorter time spans.
http://www.oceta.on.ca/profiles/mikrotek/mikrotek_tech.html

DARAMEND Bioremediation Technology
Adventus Group
A technology that involves the addition of soil-specific DARAMEND organic amendments to improve the biodegradation of contaminants in soil. DARAMEND is effective for many contaminants including PAHs, chlorophenols, TPH, pesticides, herbicides, phthalates, and organic explosives.
http://www.oceta.on.ca/profiles/grace/prograce.html

Deep Drawn and Ironed Cylinders and Pressure Vessels
DDI Seamless Cylinder International Inc.
DDI parts are economical and efficient where final machining would normally be required. High strength and fine grain structure are innate enhancements of the severe cold working for the DDI process.
http://www.oceta.on.ca/profiles/ddi/cylinder_tech.html

Eriksson System™- Contaminated Sediment Removal and Dewatering
Eriksson Sediment Systems Inc.
System to remove and dewater contaminated marine sediments that significantly reduces contaminant resuspension and prevents sediment inflow into already cleaned areas.
http://www.oceta.on.ca/profiles/eriksson/eriksson.html

Environmental IMPACT™ Modelling Software
EcoMetrix Inc.
Environmental IMPACT™ is a user-friendly, customizable, computer software tool for conducting analyses on the transport and accumulation of contaminants through the environment, and to permit calculations of dose or risk to humans and other biota.
http://www.oceta.on.ca/profiles/beak/impact.html

Environmental Management System Software (ISO 14000)
GreenWare Environmental Systems Inc.
ISO 14000 environmental management system software, consisting of three products for assessing, implementing and auditing companies for compliance to ISO 14001, the international standard for environmental management systems.
http://www.oceta.on.ca/profiles/greenware/greenwr.htm

F-J

K-O

LIST - Limnofix In-Situ Sediment Treatment
National Water Research Institute (NWRI) - Environment Canada
An in-situ, chemical injection process for the bioremediation of contaminated marine and aquatic sediments.
http://www.oceta.on.ca/profiles/limnofix/list.html

Low Temperature PCB Destruction
Kinectrics Inc.
A safe, effective, low temperature process to destroy both low and high level PCB wastes on site.
http://www.oceta.on.ca/profiles/oht/pcb/low-temp.html

MAP™ - Microwave Assisted Extraction Process
Environment Canada - MAP Division
A high speed, energy efficient, ex-situ process for the extraction of organic contaminants from soil.
http://www.oceta.on.ca/profiles/cwt-tran/map.html

P-T

Pressure Pulse Technology for Recovery of Non-Aqueous Phase Liquids
Wavefront Environmental Technologies Inc.
Pressure Pulse Technology (PPT) applies large-amplitude pulses of pressure to porous media at the water table, exciting the media and thus increasing fluid level and flow. This facilitates recovery of water resources, oil, and contaminants in the form of non-aqueous phase liquids.
http://www.oceta.on.ca/profiles/Wavefront/PPT_tech.html

Reactive Iron Walls for In-Situ Degradation of VOCs in Groundwater
EnviroMetal Technologies Inc. (ETI) / Adventus Group
The installation of a permeable wall, containing reactive metallic iron, in the path of a chlorinated VOC-containing groundwater plume provides a low cost, low maintenance, high efficiency solution to ground water remediation.
http://www.oceta.on.ca/profiles/eti/proeti.html

ROBYS™ Gasoil Stabilization and Purification
Aldwich Canada Ltd.
A modular gasoil stabilization and purification process, which enables the thermal cracking of used oil to gasoil products such as diesel fuel and heating oil.
http://www.oceta.on.ca/profiles/parexcel/parexcel_tech.html

TORBED® Process Reactor Technologies
Torftech (Canada) Inc.
High-efficiency generic contacting devices used for heat and/or mass transfer between gases and solids, capable of processing virtually any shape or type of particle or mixture of substances.
http://www.oceta.on.ca/profiles/torftech/torftech_tech.html

U-Z

UV/Oxidation Technology
Calgon Carbon Canada Inc.
On-site destruction of hazardous organic chemicals through a family of UV/Oxidation processes, combining ultraviolet light, an oxidant such as hydrogen peroxide and proprietary catalysts, if necessary. Each system is sized and adapted for the contaminant concentration, water matrix and flow rate.
http://www.oceta.on.ca/profiles/calgon/calgon_tech.html

Waste Oxidizer System
Eco Waste Solutions
An on-site, low cost and environmentally sound waste oxidizer system for destroying solid, liquid and medical waste.
http://www.oceta.on.ca/profiles/eco_waste/ecowaste.html

Waterloo Barrier™ for Groundwater Containment
Waterloo Barrier Inc.
Waterloo Barrier™ is a low permeability cutoff wall for groundwater containment and control. It features steel sheet piling with joints that can be sealed after the sheets have been driven into the ground.
http://www.oceta.on.ca/profiles/wbi/barrier.html

A full catalogue of all Environmental Technology and Business Profiles produced by OCETA may be viewed at: http://www.oceta.on.ca/catalogue.htm